Industrial Condenser Dryers of the DH-S Series
The DH-S standard series allows you the cost-effective protection of stored goods, production facilities, building structure and inventory against moisture damage ...
Because the simplest solutions are often the best.
DH-S condenser dryers successfully combine global procurement management with local production refinement at the production location Germany.
That is how they provide two decisive advantages in one device:
The attractive price-performance-ratio of an international standard solution for many traditional dry keeping tasks and a modular refinement of electrical systems and aquiferous components meeting European standards – all manually finished and quality-controlled at Trotec in Germany.
Therefore, with Trotec condenser dryers of the DH-S series you can benefit from reliable standard solutions for cost-effective dehumidification whenever you need it for protection against corrosion and condensation in production and storage areas for industry, logistics or supply.
The industrial condenser dryers of the DH-S series are exclusively available only at Trotec!
Investment protection for your drying devices
Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...
Did you know that every construction dryer is at the same time a commercial dehumidifier, but that not every commercial dehumidifier is automatically a real construction dryer? Here you can find out the reasons for this, and why hot gas defrosting makes the decisive difference ...
Reliable dryers with a high dehumidification capacity
The efficient humidity control allows the economical prevention of condensation, mould and corrosion damage, increased reliability of electrical systems, optimised process conditions for manufacture and production as well as stable climate conditions in storerooms and archives.
Not to forget about the fact that drier air can be heated more easily resulting in reduced heating costs.
With all condenser dryers of the DH-S series, humidity control can be humidity-dependent by means of target value specification at the internal hygrostat or humidity-independent in continuous operation. For flexible use at different locations, DH-S devices are provided with stable swivel casters* and a residual water draining function*
The integrated hot gas automatic defrosting ensures efficient dry keeping without breaks for defrosting at certain intervals in which dehumidification pauses.
Condensate can be drained through the external outlet across stories because the standard condensate pump* is designed for a pump head of four metres.
In the bigger products the pressure and the suction side of refrigerant pressure is measured separately for each compressor and is shown on an easy to read manometer*. Thanks to that all potential disorders detected early and the maintenance intervals may be planned earlier.
Thanks to their sturdy frame construction the condenser dryer of the DH-S series are distinguished by their high casing stability.
* Depending on the model, for more details see technical data
Application examples from practical experience:
 |
 |
 |
 |
All Industrial dryers of the DH-S series in direct comparison:
To find the industrial dryer which exactly meets your requirements, please consult the concise overview of all Industrial dryers of the DH-S series from Trotec, which we're providing to you here so that you can compare them directly to each other.
Models which you do not wish to include in your comparison can be easily dismissed with only one click.
A few practical benefits:
- Reliable dryers with a high dehumidification capacity
- Special cost-effective solution for typical dry keeping applications in production halls or warehouses
- Modular refinement of electrical equipment and components containing water according to European standard – handmade in Germany
- DH 25 S / DH 65 S with aluminum tube evaporator for an effective dehumidification performance also, when the humidity in the room is low
- Excellent value for money
* Depending on the model, for more details see technical data
Make use of our best practice industrial services
Since every industrial undertaking has characteristic process flows, installations and facilities, every air treatment solution demands case-specific device configurations. All in all, the combined effects of air currents, humidity conditions and temperature fluctuations are often hard to calculate on a purely theoretical basis, e.g. in airlock areas or on conveying paths. The consequence: Unnecessary additional costs due to an overestimated demand or – even worse – solutions not working sufficiently in real life.
You can count on our experts
In order to precisely calculate the demand in the industry and to develop tailor-made concepts for climate conditioning experienced climate specialists are needed. Rely on our team of experts as well as the industrial services: We analyse the individual requirement situation with you present on site, determine the specific demand for devices and develop a tailor-made project solution right up to the exact positioning of the devices.
Just give us a call at +49 2452 962-777 – our industry consultants will be pleased to help you personally and provide information regarding our best practice industrial services. Or send a request indicating your personal requirements directly to our industry experts. We will answer promptly!
