Submerged clear water pump TWP 9005 E

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450
  1. Products & Services
  2. Powertools
  3. Pumps
  4. Submerged pumps
  5. Submerged clear water pumps
  6. TWP 9005 E

Submerged clear water pump TWP 9005 E

900 W pump with near-ground suction for wipe-dry results with a flow rate of up to 14,000 l/h

Trotec's most powerful submerged clear water pump TWP 9005 E pumps off up to 14,000 litres of clear to slightly contaminated water per hour. This makes it the perfect partner if you suddenly need to pump large amounts of water off or over quickly and efficiently. It is excellently suited for draining water from pools, for the quick elimination of leakages caused by a defective washing machine or of ground water ingress in basement rooms as well as of water that has penetrated the walls owing to a flood or heavy rainfall. Another possible application would be when work is required in drainage shafts.

The maximum delivery head of the TWP 9005 E can amount up to 11.5 metres. An integrated check valve prevents the water from flowing back after switch-off and so reduces the time to restart suction.

With its high-performance and maintenance-free 900 W motor the TWP 9005 E pumps off even slightly contaminated water with particle sizes of up to 5 millimetres. With an enormous conveying capacity of up to 14,000 l/h the compact submerged pump renders good services in multiple scenarios and fast as the wind.

"Wipe-dry" with a residual water level of only 3 mm

Starting and residual water level

On level ground, this high-performance unit with near-ground suction pumps off virtually all water leaving no more than a residual water level of 3 mm. The remaining water film can just be mopped up. Hence, the pump is ideally suited for drying shallowly flooded surfaces f.i. in basements or swimming pools quickly and thoroughly. A water level of only 80 mm is sufficient for the TWP 9005 E to start the pumping operation.

The clear water pump TWP 9005 E may be used in a water depth of up to 7 m – this is rendered possible by the robust, watertight and impact-resistant plastic housing. An integrated thermal protection circuit protects the submerged pump against overheating. Consequently, it is also optimally prepared for long-term applications. The high-quality ceramic face seal and a low-wear shaft render the TWP 9005 E particularly durable.

Automatic switch-on and -off via float switch

Thanks to the steplessly lockable float switch the functioning of the electric pump is conceivably easy: simply set the desired water level and the automatic switch-on/switch-off function will see to the rest. The dry run protection protects the incorporated technology during automatic operation. Needless to say, manual operation is also possible at a low water level.

Via the float switch you can control the water level of the room or container to be drained. The pump switches on and off automatically according to the height of the float switch.

Practical universal connections

The comfortable carrying handle renders the transportation of the compact pump within the garden or to any other application site mere child's play. Simultaneously, it serves as pump suspension for the TWP 9005 E by use of the nylon cord (supplied in the scope of delivery), e.g. for lowering the pump safely into a pool. The device is equipped with universal connections at the elbow for inner diameters of 25 mm and 32 mm as well as 1'', 1¼'' and 1½''.

If required, further hoses can be connected to the pump via threaded connectors without difficulty. Due to the elbow's flexibly adjustable position hoses and pipelines may also run parallel to the ground. A wide operating range is ensured by the 10 m power cable.

A reduced pump performance satisfies your requirements?

Depending on your individual requirements Trotec's submerged clear water pumps TWP 4005 E and TWP 7505 E recommend themselves with a maximum delivery head of 7.5 or 10 metres and a flow rate of up to 7,000 or 13,000 litres per hour.

A few practical benefits:

  • Impressive 900 watts of power for pumping up to 14,000 litres per hour
  • Maximum delivery head: 11.5 m
  • Ideally suited for the recirculation of water, for pumping it off or out of e.g. swimming pools, rain barrels, wells or basements after a flood, heavy rainfall and during work in drainage shafts
  • For effortless pumping of clear water with suspended particles sized up to 5 mm
  • Extremely durable due to ceramic face seal
  • Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
  • Automatic switch-on/-off due to steplessly adjustable float switch
  • Dry run protection during automatic operation
  • Fixing option for the float switch during automatic operation
  • Near-ground suction to a level of 3 mm resulting in a wipe-dry floor
  • IPX8 type of protection – protected against the ingress of water upon immersion
  • Universal connection for flexible coupling
  • Backflow preventer barring a return flow
  • Large ergonomic carrying handle – suitable for fastening the suspension cord
  • Submerged pump of TÜV-tested quality
The submerged pump TWP 9005 E is supplied as complete set including reducer (with preassembled backflow preventer and seal ring), elbow, a nylon cord of 12 m length and a 10 m power cable.
Scope of delivery for the submerged clear water pump TWP 9005 E
Tested for safety, TÜV GS ID 1419062842

TÜV-tested quality

With the TWP 9005 E you are always on the safe side, for this submerged clear water pump is supplied in TÜV-tested quality, thus guaranteeing high value, safety and functionality.

Brand quality plus cost-efficiency

Reliable, powerful and suited for the most diverse clear water applications: Those are some of the quality features of Trotec's submerged clear water pumps. No matter the demands, owing to their high capacity these pumps are never out of their depth. HighPerformance in every respect – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!


All important features at a glance

Clean water
Powerful 900 W motor
Flow rate of 14,000 litres per hour
Delivery head of 11.5 metres
Immersion depth: 7 metres
A water level of no more than 80 mm is sufficient for starting the device
The device continues to operate to a residual water level of 3 mm
Slightly contaminated water with particle sizes of up to 5 millimetres
Universal connections for inner diameters of 25 mm and 32 mm
Threaded connectors of 1’’, 1¼’’ and 1½’’
Automatic device switch-on/-off
Manual continuous operation
Steplessly lockable float switch
Integrated backflow preventer
Sturdy, ergonomic carrying handle
Nylon lowering cable of 12 m length
Cable length: 10 metres
For the application in swimming pools
Use if a washing machine has sprung a leak
 

Delivery head and flow rate of the TWP 9005 E

Delivery head and flow rate of the TWP 9005 E

Special equipment features of the TWP 9005 E

The submerged clear water pump TWP 9005 E conveys clear or only slightly contaminated water with particle sizes of up to 5 millimetres.
Particle size: 5 mm
The high-quality ceramic face seal and a low-wear shaft extend the pump’s lifetime.
Ceramic face seal
The integrated backflow preventer (non-return valve) prevents the return flow of the water at the end of the pumping process.
Integrated backflow preventer
Hoses and pipes with an inner diameter of 25 / 32 mm as well as 1’’ / 1¼’’ / 1½’’ threaded connectors can be flexibly coupled with the pump.
Universal connections
The height for the pump’s automatic switch-on/-off can be reliably regulated by means of the steplessly adjustable float switch.
Steplessly adjustable float switch
When locking the float switch in horizontal position, the pump operates continually and sucks off the water until the ground is “wipe-dry” (only 3 mm remain).
Near-ground suction during continuous operation to a residual water level of 3 mm
For lowering the pump into the water, the supplied 12 m nylon cord is affixed to the sturdy, ergonomic carrying handle.
Ergonomic carrying handle
TWP 9005 E at one glance: Combined display of relevant performance values such as the switch-on/switch-off point, delivery head and submersion depth.
Schematic overview

The TWP 9005 E is extremely versatile:

Up to an immersion depth of 7 metres, the pump is ideally suited for all applications in clear or only slightly contaminated and chlorinated water.
Suitable to an immersion depth of 7 metres
With the submerged pump TWP 9005 E pumping off or recirculating the slightly contaminated water from cisterns or rain barrels can be accomplished in a trice.
For use in slightly contaminated water as collected in rain barrels
The basement steps have been flooded owing to heavy rain? If the water to be pumped off is only slightly contaminated, this does not constitute a problem for the clean water pump TWP 9005 E.
Draining in the staircase to the basement
Used in swimming pools or basement laundry rooms – the submerged clear water pump TWP 9005 E with near-ground suction pumps level ground “wipe-dry”, i.e. to a residual water level of only 3 mm.
Application in basement laundry rooms

Buy

Submerged Clear Water Pump TWP 9005 E show in Trotec online shop

Submerged Clear Water Pump TWP 9005 E

The compact submersible water pump TWP 9005 E impresses with its power and user-friendly handling both homeowners and passionate hobby gardeners. The max. Flow rate of 14,000 l / h speaks for the TWP 9005 E as well as the extraordinary head of 11.5 meters.

You save: 43 %

73.53 £ 41.34 £ incl. VAT
Show net price (VAT not included)

buy

Details

Technical data
General information
  Article number 4.610.000.009
Electrical values
  Mains connection 230 - 240 V/50 Hz
  Power input [kW] 0.9
Electric connection
  Connection plug CEE 7/4 (Schuko plug type F)
  Cable length [m] 10
Performance data
  Max. conveying capacity [l/h] 14,000
  Grain size [mm] 5
  Delivery head max. [m] 11.5
  Immersion depth max. [m] 7
  Minimum operating depth [mm] 80
  Water level extraction height max. [mm] 3
  Water temperature max. [°C] 35
Safety feature
  Type of protection IPX8
  Protection class I
Functions and features
  On-/Off switch Automatic
  Switch-on point float switch [mm] 600
  Switch-off point float switch [mm] 180
  Thermal overload protection
  Backflow preventer
  Stainless steel screws
  Suitable for salt water operation or permanent operation (> 10h)
Housing design
  Plastic
  Stainless steel
  Aluminium
  Steel
Accessories scope of delivery
  Adapter
  Hose connection (inner diameter) 25 / 32 mm
  Thread connection 1", 1 1/4", 1 1/2"
  Backflow preventer
  Nylon rope tear resistant 12 m
Dimensions
  Length (packaging excluded) [mm] 160
  Width (packaging excluded) [mm] 160
  Height (packaging excluded) [mm] 335
Weight
  (packaging excluded) [kg] 4.6

 standard equipment

 optionally available

 not available

Alternative products

TWP 9005 E with alternative products:

start comparison
TWP 4005 E Submerged Clear Water Pump show in Trotec online shop

TWP 4005 E Submerged Clear Water Pump

The compact submerged clear water pump TWP 4005 E impresses both homeowners and passionate amateur gardeners with its power and user-friendliness. The max. conveying capacity of 7,000 l/h also speaks for the TWP 4005 E as well as the extraordinary discharge height of 7.5 meters.

You save: 45 %

50.53 £ 27.55 £ incl. VAT
Show net price (VAT not included)

buy

Submerged Clear Water Pump TWP 7505 E show in Trotec online shop

Submerged Clear Water Pump TWP 7505 E

The compact submersible water pump TWP 7505 E impresses with its power and user-friendly handling both homeowners and passionate hobby gardeners. The max. flow rate of 13,000 l / h speaks for the TWP 7505 E as well as the extraordinary output height of 10 meters.

You save: 46 %

68.94 £ 36.75 £ incl. VAT
Show net price (VAT not included)

buy

Accessories

Quality extension cable 15 m / 230 V / 1.5 mm² show in Trotec online shop

Quality extension cable 15 m / 230 V / 1.5 mm²

The indispensable accessory for electric heaters, dehumidifiers, air conditioners and more: PVC extension cable with a length of 15 m and a supply voltage of 230 V. Perfect for home use!

You save: 50 %

27.55 £ 13.74 £ incl. VAT
Show net price (VAT not included)

buy

Pro extension cable 20 m / 230 V / 2.5 mm² - Made in Germany show in Trotec online shop

Pro extension cable 20 m / 230 V / 2.5 mm² - Made in Germany

The essential accessories for electric heaters, humidifiers, air-conditioning units etc.: Pro extension cable at a length of 20 m and with a supply voltage of 230 V. All that and it's made in Germany!

32.14 £ incl. VAT
Show net price (VAT not included)

buy

Downloads