Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

T610 material moisture measuring device
  1. Products & Services
  2. Measuring devices
  3. Humidity
  4. Humidity measuring devices
  5. T610 material moisture measuring device

T610 material moisture measuring device

Professional hand-held measuring device for quick, non-destructive sub-surface moisture measurement

T610
T610
T610

Using the T610, moisture distributions can be detected in building materials, walls, ceilings or floors to a depth of up to 300 mm – owing to the microwave technology. Moreover, the method works independent of the salinity degree of the material. For the microwave method it is, therefore, irrelevant whether an older or a new building is inspected.

Brilliant large-digit display

The T610 comes equipped with particular display glass ensuring high-contrast presentation even in bright sunlight as well as enabling the quick and reliable detection of the moisture distribution in wall or floor areas when combined with the large-digit, real-time measurement value display.

Integrated alarm functionn

Handy and time-saving: Prior to measuring you can define an individual limit value in the T610's settings. Should this alarm limit value be exceeded in the course of measuring, an acoustic warning signal is emitted automatically.

This way, large wall and floor areas can be measured quickly and effectively. During measuring, you can focus exclusively on the measuring object without the need to permanently keep an eye on the displayed measuring results.

The T610 comes with a continuous surface made of highly scratch-resistant Blanview special glass and capacitive touchscreen control panel.
Touchscreen control panel
The microwave sensor of the T610 contains an antenna arrangement enabling non-destructive penetration depths of up to approx. 30 cm – ideal for the sub-surface moisture measurement of floors, walls or ceilings.
Material moisture measuring device T610

Finally one software for basically all measuring devices

As optionally available Professional version MultiMeasure Studio is not only perfectly suitable for fully compatible devices like the T610.

Owners of partially compatible or isolated measuring instruments can also benefit from this software, since it enables the analysis and administration of all measuring projects and customer data across multiple devices in a single application!

Using the unique report generating function you can create professional measurement reports in a trice:

Numerous boilerplate texts for building diagnostics, moisture measurement, leak detection and thermography are already included completely formulated (German version only).

Interested? Here you can access all information on the Professional version...

Technical data in comparison

A direct comparison of all moisture meters:

In order to find exactly the right moisture meter for you, you have the possibility here to clearly compare all moisture meters from Trotec.

Models that you do not wish to include in the comparison can simply be clicked away.

Technical data in comparison

A few practical benefits:

  • Measuring device designed and produced according to the highest quality standards in Germany
  • German industrial design in robust, premium two-component construction with IP54 type of protection
  • Continuous easy-to-clean glass surface made of highly scratch-resistant Blanview special glass for a high-contrast display of measured values even in the sunlight
  • Capacitive touchscreen control panel
  • High-resolution colour display for simultaneous indication of two measured values
  • Specifically designed for quick, non-destructive sub-surface measurements
  • Moisture alarm function
  • Grid measurement function via USB with active software connection
  • Incl. MultiMeasure Studio measurement data management software (standard download version)

Also ideally suited for combined building diagnostics measurements using the material moisture measuring device T660

Owing to the combined measurement of sub-surface moisture with the T610 and of near-surface moisture with the T660, complex correlations can be distinguished, narrowed down and classified, e.g. hygroscopic humidity occurrences resulting from salinization or leak detection. In the course of this the T660 captures the topmost two to four cm of the construction material and the T610 measures the volume moisture values to a depth of 30 cm.

Significant results regarding a multi-dimensional moisture distribution can be obtained via grid measurement based on surface and sub-surface moisture measurement values.

With an active USB connection to the measuring device the MultiMeasure Studio software included in the scope of delivery provides a convenient assistance function for the creation and visualization of grid measurements.

Combined building diagnostics measurement

Shop

Technical data

Technical data
General information
  Article number 3.510.207.600
Wood moisture [%]
  Min. measuring range | Wood moisture [%]
  Max. measuring range | Wood moisture [%]
  Resolution | Wood moisture [%]
  Accuracy | Wood moisture [%]
  Min. temperature compensation [%]
  Max. temperature compensation [%]
  Measuring principle
Material moisture [%]
  Min. measuring range | Material moisture [%]
  Max. measuring range | Material moisture [%]
  Accuracy | Material moisture [%]
  Resolution | Material moisture [%]
  Measuring principle
Material moisture [digits]
  Min. measuring range | Material moisture [Digit] 1
  Max. measuring range | Material moisture [Digit] 200
  Accuracy 0.1
  Resolution [Digit] 0.1
  Measuring principle Microwave
  Max. penetration depth (non-destructive) [mm] 300
Display
  LCD
Device control
  Touch key display
  Push buttons
  Thumbwheel
Housing design
  Plastics
Power supply
  Internal (battery) 4 x 1.5V, AA
Ambient conditions
  Operation - min. temperature [°C] 0
  Operation - max. temperature [°C] 50
  Operation – min. relative humidity [% r.F.]
  Operation - max. relative humidity [% RH] 95
Dimensions
  Length (packaging excluded) [mm] 191
  Width (packaging excluded) [mm] 65
  Height (packaging excluded) [mm] 65
Weight
  (packaging excluded) [kg] 0.425
Standard scope of delivery
Standard scope of delivery
  Measuring device
  Battery(-ies)
  Factory test certificate
  Operating manual
  Protective cap
  Electrode tips (1.5 x 20 mm)
  Electrode tips (2.2 x 8 mm)
  2 x union nuts
  Wood type directory
Ascertainable measured values and functions
Internal sensors
  Material moisture [digits]
  Wood moisture [%]
  Material moisture [%]
Functions and features
  Maximum value display
  Minimum value display
  Measured value hold function
  Acoustic alarm function
  Automatic functional test
  Automatic battery test
  Display illumination
  Automatic switch-off
  Non-destructive measurement method
  Selection sensor characteristic map (sens)
  Unit 2
  Selection of wood material characteristics (Mat)
  Temperature compensation
  Manual temperature setting
  Mode selection slide control
  Retaining clip

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...