Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

  1. Industry solutions
  2. Overview
  3. Food industry
  4. Dry air storage facilities: dehumidifying rather than heating

In dry air storage: dehumidifying rather than heating

A dehumidification system is always less expensive than heating systems

TTR series: stationary and mobile solutions for dry air storage

The requirements in dry air storage are very much alike in many industries: Bacterial growth on foodstuffs, powders going lumpy, corrosion on metal parts – all can be prevented, when the relative humidity is constantly kept below 50 %. A value of 70 % RH suffices as mould protection. The dehumidifiers of the TTR series along with the matching data loggers represent dehumidification systems which reliably meet this target value for all sizes of warehouses and the hauling distance.

For keeping the humidity level in a dry storage facility constantly below 50 % of relative humidity, two options come to mind: First, you can ensure proper insulation and then provide energy-intensive heating. This can, however, not be realized for all warehouse sizes; nor is it always the reasonable thing to do. A more energy-saving and hence cost-efficient solution is the second option: the installation of a dehumidification system inside the dry storage facility. It constantly supplies the room with dry air and strips the inflowing humid air from water. A solution functioning throughout the year even in poorly insulated halls or tents. For dehumidification it is enough that the outer shell of the dry storage facility is diffusion-proof and the seals are impervious to smoke.

Dry air storage facilities can be found in various sectors and they exist in all sizes – ranging from room size to halls, silos or large marquees. Typical examples for dry air storage are the sugar silos in the food industry, PCB storage facilities in the electronics industry, raw materials warehouses in the production of chemicals, storage tents with defence technology in the field or car parts depots of automobile manufacturers. The desiccant dehumidifiers of the TTR series, are suitable for all orders of magnitude, for they comprise both stationary and mobile devices of different performance classes. The stationary TTR desiccant dehumidifier are marked with 4-digit model numbers. Beginning with the TTR 800 the devices are also available with weather protection. This means they can be positioned outside the storage facility and still come with enough power to supply it with dry air and exhaust humid air from there via air hoses. The mobile TTR dryers bear 3-digit model numbers and are suited for flexible solutions in smaller dry storage facilities. Both – mobile and stationary dehumidifiers – are also available as stainless steel versions, e.g. for the application in food storage facilities. The TTR dehumidifiers from Trotec feature two separate air flows (TTR Trisorp Dual principle of operation) characterized by an especially simple adjustability. Moreover, with their internal heat recovery and the high level of resilience and performance of the special rotors they rank among the most economic units of their kind. Data loggers, such as the innovative DL200X, complete the dehumidification concept and enable constant monitoring.

To be considered from the outset: pre-drying hauling paths

The dehumidification of hauling paths and transfer sites should be included in the process of planning air dehumidification measures in dry air storage facilities. If you are dealing with hygroscopic materials such as salt, sugar, powdered instant beverages, chemicals, medication or propellants, a good dehumidification concept for dry air storage starts with the hauling paths. Pre-drying the conveying air of the pneumatic transport routes ensures that powders and granules arrive at the dry storage facility in a free-flowing state. For this application, as well, the desiccant dehumidifiers of the TTR series are ideally suited.

Making use of expert knowledge with the Trotec industrial services team

The Trotec Group not only provides the desiccant dehumidifiers for dehumidification in dry air storage facilities and along hauling paths. The employees of the industrial services team also lend their support in planning the necessary capacity. Trotec further provides mobile dehumidifiers on loan to test the concept beforehand. Only after trial operation has proved that the humidity level remains below the target value of 50 % RH will your final solution be installed.

Upon request, we also produce customized desiccant dehumidifiers as special models

Upon request, we will readily produce tailor-made desiccant dehumidifiers as special models “made in Germany” perfectly geared to your needs, e.g.:

  • TTR industrial desiccant dehumidifiers with hygienic design
  • TTR industrial desiccant dehumidifiers for PWIS-free dry air
  • TTR industrial desiccant dehumidifiers with extremely low dew point

Makes use of the possibility of having special models with tailored components for your individual needs planned, designed and manufactured in close consultation with our specialists.
Click here to find out more ...

Further application examples for air dehumidification

  • Dehumidifying & air cleaning in storages

    The Trotec Group provides different dehumidification solutions – from the condensation dehumidifiers of the DH series to the adsorption dryers of the TTR series. Both are available as mobile and stationary versions. We offer the right dehumidification technology for every depot or dispatch warehouse. Innovative measuring devices and data loggers complete the dehumidification concept for storage...

    Additional information
  • Dehumidification in fertilizer storage facilities

    The production of hygroscopic materials in the chemical industry requires intuition and sure instincts. After all, the substances love water and readily absorb the moisture contained in the ambient air. And this can have disastrous economic consequences. As it binds water, the material starts sticking together and clumping, and may become unusable in the worst case. One example are fertilizers. If...

    Additional information
  • Dehumidification in wind turbine component depots

    In the construction phase of a wind turbine, the plant’s components are sometimes stored for months in very large depots such as halls or temporary storage tents prior to assembly. To prevent damage caused by corrosion or frost during storage, a sophisticated system for humidity regulation is necessary.

    Additional information
  • Dehumidification of appliance rooms

    Proper protective equipment and perfectly functioning devices are indispensable for operations by the fire brigade and the THW. Protective suits, hoses and tubes must be absolutely leakproof. Tools such as spreader forceps and bolt cutters have to be in an immaculate condition, just like technical devices such as high-performance fans, cutting torches and headlights. In order to store the whole...

    Additional information
  • Dehumidification in drying rooms

    In the production of electronic equipment and semiconductors humidity can lead to electrostatic charge. For this reason, sensitive processing steps are being performed in cleanrooms and drying rooms. The mobile adsorption dryers of the TTR series are ideal for these high requirements during dehumidification.

    Additional information
  • Dehumidification in ships' holds

    There is only one remedy for mould, microbial contamination and corrosion on cargo and ship: to supply constantly dry air with a humidity suitable for the cargo into the ship’s hold. To achieve reliable results, the dehumidification system must have been planned professionally.

    Additional information
  • Dehumidification circuit board storages

    When storing printed circuit boards humidity can lead to electrostatic charge and patina formation or corrosion. Particularly suited for dehumidifying the PCB storage space are the mobile adsorption dryers of the TTR series – just as well as for other operating sectors in the electronics and semiconductor production.

    Additional information
  • Dehumidification dispatch & transport

    In the silo as well as during transport hygroscopic bulk material is endangered by humidity – this holds true for both the chemical and the pharmaceutical industry. Humidity continues to be a problem after production, because the products are mostly packed into damageable cardboard boxes with paper inserts. Therefore, dehumidification also plays a key role for storage, dispatch and transport.

    Additional information
  • Dehumidification in timber yards

    In the past, when storing wood it had been rather a challenge to keep the moisture of furniture wood below the required 9 per cent, for example: If no dehumidifiers are used, seasonal temperature differences and fluctuations in air humidity cause the wood moisture to rise. This considerably affects timber quality and results in problems during processing and even in reject.

    Additional information
  • Dehumidification in wine cellars

    The different temperatures at which the wines are fermented are usually set by the winemaker via the thermostats integrated in the tanks. But the use of dehumidifiers is still indispensable. If the humidity level is low, particularly red wines can develop in the best way. Furthermore, a drying device is able to fight condensation efficiently. Trotec has a series of high-performance drying devices...

    Additional information
  • Dehumidifying when storing raw tobacco

    The refinement of raw tobacco is considered a fine art. Far from the major tobacco industry smaller factories produce special mixtures with highly diverse flavours. But here, too, the firms usually have to purchase the raw tobacco, coming from many parts of the world, by container load. And since in most cases the product is not processed all at once, the tobacco leaves have to be stored away...

    Additional information
  • Carpet cleaning – Dehumidification in the drying room

    So the processes of cleaning and drying should be adapted to the individual fibres and material characteristics of the carpeting. As little as an incorrect drying temperature may already cause damage to the material.

    Additional information

Trotec products for the food industry

 standard equipment

 optionally available

 not available

Application examples for the food industry

  • Dehumidification and meat aging

    Dry aging is certainly an art in itself. Meat lovers appreciate the complex and time-consuming procedure involved in the making of this outstanding type of beef. It is not without reason that dry-aged beef is considered to be the best type of steak in the world. It not only calls for an excellent beef quality. Also vital for the aging facilities is the ideal technical equipment. Experts check the...

    Additional information
  • Dehumidification in supermarkets

    A supermarket has various sections requiring different climate conditions. For instance there are fresh food areas holding fruit and vegetables which need to be cooled constantly to keep the goods fresh for as long as possible. It gets even colder at fresh meat counters and in the frozen food section. A run-of-the-mill air-conditioning system can usually not efficiently cater to such a wide...

    Additional information
  • Dehumidification in the meat industry

    Especially in meat processing and sausage production, optimal hygiene is paramount. This is the only way to guarantee a good product quality. Therefore, strict hygienic requirements have to be met when handling meat – particularly in cooling areas where raw products are processed. But due to the low temperatures and high humidity levels, this is exactly where to expect the greatest dangers:...

    Additional information
  • Humidity regulation in cheese dairies

    The ripening of young cheese may be the most important step in cheese production. For soft cheese, the ripening process takes several days or weeks. For sliced and hard cheese, this process even takes several months or years. The climate plays a significant role in the development of cheese and the assurance of product quality. Usually, the temperature ranges from 7 to 15 degrees Celsius and the...

    Additional information
  • Lyophilisation tunnels and frozen storage

    The food industry is facing a paradox: On the one hand, turning water into ice is the raison d'être of lyophilisation tunnels and cold stores. On the other hand, icing is a major problem in this process. Ice, hoarfrost and fog in the cooled production infrastructure lead to costly accidents and malfunctions right up to production losses. Setting up additional industrial dryers prevents icing by...

    Additional information
  • Storage tents/marquees

    As opposed to conventional warehouses, marquees and large storage tents are erected quickly and at low cost. The only challenges in the face of buildings – even with insulated marquees – are condensation and humidity control. Stationary high-performance dryers with hose systems for a consistent supply of dry air prevent moisture problems in advance.

    Additional information
  • Dry air storage

    The requirements in dry air storage are very much alike in many industries: Bacterial growth on foodstuffs, powders going lumpy, corrosion on metal parts – all can be prevented, when the relative humidity is constantly kept below 50 %. A value of 70 % RH suffices as mould protection. The dehumidifiers of the TTR series along with the matching data loggers represent dehumidification systems which...

    Additional information
  • Dehumidifying when storing raw tobacco

    The refinement of raw tobacco is considered a fine art. Far from the major tobacco industry smaller factories produce special mixtures with highly diverse flavours. But here, too, the firms usually have to purchase the raw tobacco, coming from many parts of the world, by container load. And since in most cases the product is not processed all at once, the tobacco leaves have to be stored away...

    Additional information
  • Dehumidification in the confectionery manufacturing

    As part of the quality assurance dehumidifiers belong into every confectionery and chocolate factory: The devices ensure dry ambient air in the entire production chain. All of the production stages and room sizes can be equipped with dehumidification systems and the corresponding measuring technology. Sector-specific problems are prevented as follows.

    Additional information
  • Dehumidification in wine cellars

    The different temperatures at which the wines are fermented are usually set by the winemaker via the thermostats integrated in the tanks. But the use of dehumidifiers is still indispensable. If the humidity level is low, particularly red wines can develop in the best way. Furthermore, a drying device is able to fight condensation efficiently. Trotec has a series of high-performance drying devices...

    Additional information
  • Drying compressed air

    The most frequent causes for a production stop are too much water vapour in the machines and installations, and corrosion inside the pipelines. Therefore, too humid compressed air should be avoided by all means. An effective option is the use of high-performance dehumidifiers. The answer to the question of how dry the compressed air has to be in order to guarantee optimum production conditions and...

    Additional information
  • Cable repair

    In the industrial sector, cables are often exposed to the toughest environmental conditions. Consequently, defects occur causing an interruption of the necessary power supply – in many cases for a longer period of time. To avoid serious production losses or to perform maintenance work as quickly as possible, cable breaks and defects are located with the help of infrared thermography. Cables used...

    Additional information
  • Germ and virus-free shopping in supermarkets, drugstores and pharmacies

    Seasonal flu epidemics, moulds and bacterial pathogens present supermarkets, pharmacies and drugstores with a number of challenges. Day after day, hundreds of hands reach for a shopping cart or basket, pick up goods for inspection and make cashless payments at the POS cash system.

    Additional information
  • Virus-free room and breathing air in supermarkets, DIY stores and shops

    New infectious diseases such as influenza A/H5N1 (avian flu) or COVID-19 (coronavirus) spread all over the world in an irregular, yet continuous manner. The impacts on the diverse areas of daily life are rather drastic. Many salespersons who are not systemically relevant are forced to close their shops in times of highly infectious pandemics in order to prevent a newly-discovered virus from...

    Additional information